Hello dear readers of Business Anatomy! Do you know how to work well without superiors? Can you imagine what it means to go from work to work, which takes about one minute in time? A lunch break in your kitchen? If you do not know, but really want to find out, then our article will be very interesting and useful to you! Today we will look at how each of you can start home production, a business idea for which there are so many today. But before we begin to consider them, let's figure out what a good home-based business is!

Home production: wide scope for business ideas and huge benefits!

In addition to what was listed in the preface, this type of activity has much more serious advantages - if you can start your own business idea and home production starts to generate income, you will not want to return to your previous life. Financial independence, low stress, the ability to plan personal time and income give an excellent feeling.

Let me give you an example from my life - successfully working in this area for quite a long time, I went to the office where I worked earlier to visit my colleagues and treat them with a cake on a lunch break. There I accidentally caught the very envious glance of my former director. At first I didn’t understand what caused it, but it dawned on me - the need to get to the office through traffic jams in the early morning, and at home in the evening, to be wary of “riot on the ship” all the time, keep complicated bookkeeping, endure the intrigues of subordinates and state checks ... Given all this, I even felt a little sorry for him. Moreover, the level of income with us in the near future, I am sure, will be equal. Of course, working as an employee in this organization some time ago, I could not even dream about it.

Possible problems when developing a home business!

Do not be surprised, but even when everything worked, and first, incomes flowed to you drop by drop, and then in a thin stream - there will be certain difficulties that are characteristic only of this kind of activity. I had a chance to go through them and hope to pass. Be prepared for the following points:

1. It is very difficult to properly organize your time. To understand when to work and when to relax, it can take up to six months. A prerequisite when working at home is to observe the rules of time management, so as not to subsequently catch yourself at work at 4 a.m. and subsequent awakening at 1 p.m. In fact, you don’t have to invent anything, everything was invented before us. The existing working schedule from 9 am to 6 pm and an hour-long lunch break. It is accepted in most organizations not in vain, because it is the most effective and convenient for the human body. Try to just stick with it. Sooner or later, you can keep up with everything for this period of time, and the red color of the eyes with an eternally sleepy facial expression will be a thing of the past.

2. Possible friction with households and misunderstanding of others. Even if you are confident in a strong relationship with loved ones, successful home production will seriously test them. For some reason, a person leaving for a regular job cannot imagine that you have exactly the same working day, with its own difficulties and “parks”. Get ready for the phrases: “I could do the cleaning and cook dinner while I was at home!”, “Ha ha ha, he works! He has a lot to do! ” For some reason, all relatives, acquaintances and neighbors will consider you an incredible freeloader and a rare lazy person, despite the eight-hour working day and the fact that your bank card account grows much faster than before. When I first encountered this situation, she really unsettled me and hit me hard on my nerves and pride. It’s good that the solution was found quite quickly - bribing! A few pleasant gifts to your loved ones: a little larger in size than they used to! And the atmosphere in the house will regain its former coziness and peace.

3. At one point, you will get tired of everything. A man is simply arranged so that sooner or later everything bothers him. And even the thing that used to be fun starts to annoy. This feeling may well arise when working at home, especially with a lack of communication. Fortunately, in home production, business ideas have more room for maneuver than in ordinary employment - here you can always change things to your interests, rather than pulling a hateful strap. As soon as you begin to notice that the lesson is beginning to be burdensome, immediately look for new variations of the usual thing.

4. The next minus is the lack of social security if you have not registered your home business. However, this is not worth joking if you want to sleep peacefully. It will become possible to reach a good level of income only through state registration, for example, as an individual entrepreneur. Moreover, several bills are currently being developed that can make this procedure almost painless. In addition, the introduction of special benefits for small businesses in the form of exemption from start-up entrepreneurs from taxes for the first 3 years of their activity and 5 years if an individual entrepreneur is younger than 30 years is considered. Such a step, of course, can lead out of the shadow of many representatives of the home and apartment business. And now I can recommend you to familiarize yourself with all the nuances of the simplified tax system from the article:

That's all the difficulties that may arise in your way. Getting around them is easy enough, and if you know about their existence, then making it even easier. It's time to move from the introduction to the most interesting. We will divide the following material into two parts: home production, business ideas for an apartment, and production in a private home, where you can develop even heavy industry. We’ll warn you in advance - select for yourself the industry where you have already gained experience. This may be an area related to your past employment or in line with your vital interests, or being your hobby.

Business ideas for an apartment!

We will not consider all business ideas related to receiving clients in our apartment, we will simply list: sugaring (sugar removal), massage and manicure at home, hairdressing services. These things do not require any special starting costs. But it is necessary to try to isolate the workroom as much as possible exclusively for visiting clients, so that it creates the feeling of a study, rather than a family bedroom or a children's room. For the fair sex in this regard, our publication may be useful

As for the business ideas of home production in an apartment, do not think that the walls will serve as some kind of restriction. Remember, you are unlimited in anything but your own imagination and your skills!
  It would be appropriate for a woman to think about knitting and sewing her designer line of clothing, decorative soap making, the production of custom-made confectionery, and the cultivation of exotic flowers and bonsai trees. Any of these ideas is viable and can generate income.

I can tell men - even in the conditions of the Khrushchev’s kitchenette or balcony, you can create things to which you can’t pick up other epithets other than “unique” and “high-tech”. I now have the opportunity to do almost everything I wish! And I can also assemble a street table, on the entire tabletop of which a solar battery ordered from China is mounted, right next to the sofa. You might think, who needs such a table? Yes, to any person who wants to be able to work with a laptop on the territory of a private garden without pulling wires through alpine slides and garden paths. And if this table is folding so that it can fit in the trunk of a car? And in hollow legs to fix industrial cylindrical batteries? By the way, I’ll probably collect it to check how time will be, a very interesting idea!

You can glue aquariums with a unique design and deliver them to the city’s pet stores. To cut glass, and even more so - plexiglass, in an apartment, you do not need a great skill, nor a large number of tools. You can make narrow shoe racks for hallways, where the shoes are stored vertically, or designer shelves with built-in lighting.

Regarding the marketing of products, I can say that now stores of an interesting format are appearing - anyone can rent a shelf space there, for a ridiculous amount in the region of 300-700 rubles a month. Do not forget the various fairs where there are small rents for the place. And of course, online auctions and trading floors online.

As for the arrangement of the workshop in the conditions of precious and scarce square meters of the dwelling, pay attention to the pantry and the balcony. Provided that the tools and equipment are correctly positioned, full-fledged workshops are obtained from them, I know this from my own experience. The jigsaw and drill produce much less noise than the ubiquitous hammer drill. And if you put a primitive noise isolation, the neighbors may not understand that behind the wall the production is busy. So home production, business ideas in an apartment are not limited by almost anything other than your own imagination and skill at hand.

Business ideas for a private home: "heavy industry" and "agriculture"!

The conditions of the apartment allow you to do quite a lot, but of course the screech of a professional circular saw and the howl of a powerful grinder in such conditions are not permissible. Therefore, we will move on to the business ideas of home production in the conditions of a summer residence, a private house or even a garage - now our neighbors are not a hindrance! Again, pay attention to what is interesting to you, and to those areas where you are a well-established experienced specialist. You should not try to grow on an industrial scale clary catfish or crayfish, if before that they were only seen in pictures. It is relatively easy to master the production of various building blocks and panels, paving slabs and fence sections, but the competition in this area is significant, you will have to invent some of your own "chips" to stand out from the crowd. This can be a rich color palette or an unusual design in Japanese or ancient Roman style. Try to arrange the same banal concrete pillars for a sectional fence in the form of old columns, and the customer will surely find you.

I recalled now three comrades who, in a garage, painted furniture facades for cabinets and kitchens with car enamels of the “mother of pearl” and “chameleon” type and varnished them in several layers. Very expressive furniture came out as a result of such "tuning", but found its buyer. These guys went around all the organizations in their city, where they custom-assembled cabinet furniture and offered them options for their exotic facades.

Industries that suit us!

Let's list the “industrial” industries and ideas for doing home business:

- manufacturing of building materials;

- manufacture of cabinet, wicker and upholstered furniture;

- car repair;

- organization of a warehouse or a collection point for old tires, batteries or even scrap metal at its site under an agreement with the organization in need (the main thing in this matter is not to turn your entire site into a huge garbage dump, clearly define the boundaries);

- the manufacture of metal products, which we discussed in more detail in the article

This list can be continued and expanded. I can say with confidence - they are simple enough to learn. Resorting to a personal example, I will say that 10 years ago I successfully engaged in hauling upholstered furniture for pensioners, although I was still a very young boy. Since there was a general idea of \u200b\u200bproduction, I bought a furniture stapler better and more! By the way, the matter turned out to be quite simple and profitable, in any case, sometimes there were queues from customers. For those who have worked in this industry and have not achieved results, I can clearly say - do not pick up prices, furniture repairs should be at least two to three times cheaper than a new set. Do your work efficiently and the “radio effect” among your customers will go.

In socially unprotected sections of the population, the demand for such services is quite high, and the legend that “they used to do everything better” will encourage people to roll old Soviet spring sofas into leopard velvet and fasten them with chrome legs and carved armrests. I think that if the economic situation in the country does not improve for the coming year, then such services will be in increasing demand. Once again, I note: first, work very high quality, possibly even with low profitability, thereby creating a name for yourself. Subsequently, the very first person to whom you restored the sofa will ask you to remodel two chairs, and then all the soft chairs in the house, and then will recommend your services to all your relatives and friends. Then, when the clientele forms a queue, you can raise the prices. This applies to all areas!

Ideas of farming at home!

Agriculture as a business idea for home production can be painted on several volumes printed in small print. If you have a private house - now all the borders for this are open. Any breeds of domestic animals, birds, plants and mushrooms are available for breeding (I mean oyster mushrooms, champignons, etc.). You may find useful information in this article:

Polycarbonate greenhouses, infrared heaters make it possible to grow whatever you want, even organize an ostrich farm, though there is already competition here. Moreover, the state’s policy on the development of agriculture will give you some advantages, which are that when selling products from your private household plots (personal subsidiary plots), the profit received is not taxed. It is not so difficult to register your private house with an adjacent land plot as a private household plot, the main thing is that the area does not exceed 5000 sq.m., and only you and family members work on the plot (that is, it is forbidden to hire employees). But I do not think that the regulatory authorities will check who your brother-in-law is and who is not.
  But the ability to sell products without feeling the pressure of the tax burden is a very tangible plus. In addition, farmers also rely on certain subsidies and subsidies. Unfortunately, I can’t say anything about their size - it is set by local authorities and depends on the area of \u200b\u200bresidence.

A final word with easy elements of criticism and parting words!

Dear friends, I’m asking you not to focus on innovation! No need to look for something that is not there and complain that there is competition everywhere and you have no place anywhere. No need to be limited to the existing space: even in a one-room apartment it is possible to organize a profitable business. If you really want to understand what home production is, business ideas for its implementation lie on the surface and are extremely easy to learn. Yes, you should not immediately quit your main job, maybe you will have to do your job first in the evening or on weekends. Do not expect a miracle - do it yourself! Then you will see how much more interesting life will become!

Today, there are various ways to make money. You can work in an organization of narrow specialization or with a private entrepreneur. And you can organize your own business - mini-production of any product. The payback of this type of activity depends on many factors.

Garage Production

Each person who has a garage at their disposal tries to use it to organize their own business. Production can be of various sizes. It all depends on the skills of a novice businessman and his investment.

Today you can produce the following products in the garage:

• metal structures;
• construction Materials;
• various manufacturing and industrial goods.

Some businessmen manage to create a mini-alcohol plant for the production of alcohol.

Note. Illegal conduct of such activities threatens the entrepreneur with administrative punishment. Therefore, it is better to register everything.

Distillery at home

Initially, it is necessary to determine for what purposes the products will be manufactured. These may be such areas:

• pharmaceuticals
• production of alcoholic beverages;
• chemical industry;
• perfumes and cosmetics.

It is also necessary to choose raw materials for the production of alcohol. As a rule, the following agricultural crops are used in the technological process:

• corn;
• potatoes;
• sugar beets;
• fruit.

It is necessary to choose a supplier of high-quality raw materials so that the products comply with all established standards (GOSTs).

Necessary equipment:

• distillation unit;
• beer tank;
• alcohol meters;
• separators;
• refrigeration units;
• thermoelectric heaters.

Today, the search for specialized equipment is facilitated. There are a huge number of enterprises for its manufacture. It is only necessary to choose a seller with an optimal cost of production.

Metal fabrication in the garage

Small business - the production of metal products in a utility room or garage. A novice entrepreneur should be able to:

• weld structural elements with various types of welding;
• to process seams;
• correctly measure the dimensions of the product;
• high-quality paint finished products.

Installation of metal is carried out by the entrepreneur or by employees. Despite this, knowledge of how to fix the structure on any basis is necessary.

At the initial stage of establishing production, you will need such equipment:

• welding machine;
• grinder with additional nozzles;
• clamps;
• a table for cutting and welding structural elements;
• vise.

Do not forget about auxiliary tools: hammer, angle, tape measure, construction level and others.

Note. You can measure the parameters of the future design yourself.

Today, entrepreneurs produce the following products:

• gates (entrance and garage);
• gates;
• gratings;
• doors
• fences of varying complexity;
• flight of stairs;
• decor elements.

The following raw materials are used for production: metal pipes, corners, steel sheets, wire.

It is worth considering that now you will not surprise anyone with a simple design of metal construction. Therefore, in creating certain products you need to use. You can buy them in finished form or produce them yourself. This will require hearths for heating metal, special forms, a sledgehammer, tongs and other tools.

Ideas for mini-production of building materials

This type of activity today is familiar to almost everyone. The following materials can be made in the garage:

• foam block;
• aerated concrete;
• borders
• paving slabs;
• concrete rings;
• manhole covers;
• grape columns;
•   and much more.

That is, almost all small structures created on the basis of concrete mortar or natural clay.

Raw materials for the production of products:

• cement;
• sand;
• water;
• clay;
• additional components.

The latter include hardeners, which allow concrete mortar to harden much faster. As well as substances that improve the quality of concrete mortar.

To equip a mini-workshop for this production, you will need the following:

• concrete mixer;
• forms for giving parameters to the product;
• auxiliary tools;
• vibration table, which can be assembled independently;
• ordinary table for layout of tools and forms.

The natural process of solidification of concrete mortar can last from one to three days. If you put a small chamber in the garage that will be heated, the finished product is received faster. Molds with concrete mortar are placed in this chamber, where they are until the material has completely dried.

It will be useful to organize not only a mini-workshop, but also a small warehouse for storing finished products. In private households, this issue will not be a problem.

Production of hardware

The production of fasteners in the garage is gaining in popularity. You can make bolts, nuts, studs and more. To do this, you need to install a lathe with various nozzles, as well as additional equipment and tables. Such production can be put on line, if the scale of the garage space allows.

Manufacture of wire products

The ideas for mini-wire production in the garage are quite diverse. Despite this, nails and netting are often made. For this we need special machines. This type of production differs in that it is not necessary to put it on the stream. You can execute one-time orders.

Plastic recycling

You can open this business in your garage without having to invest large sums. As a rule, the capital for creation is limited to 50,000 rubles. It is necessary to purchase such equipment:

• extruder
• press compressor;
• shredder;
• injector.

Machine tools are assembled and adjusted on their own. You can ask for help from a specialist in this area.

The main advantage of this idea of \u200b\u200bmini-production is the availability of raw materials. Plastic garbage is used in the manufacture: bottles, pallets and much more. All this can be processed and create real masterpieces and stunning decorative elements:

• flower pots;
•   and other.

A prerequisite for this type of production is the imagination of the entrepreneur. Develop such a business with the help of friends and acquaintances.

Joinery production

Wood products have gained particular popularity today. All this is due to its quality indicators. Products last a long time and also have an attractive appearance. But it’s quite difficult to find a good craftsman who would manufacture custom-made products.

There is a lot of competition in this business, and initially you will have to earn a reputation. What can be made of wood:

• interior and exterior doors;
• tables and chairs;
• cabinets and chests of drawers;
• wardrobes and beds;
• shelves and coasters.

The product range does not end there. It all depends on the imagination and abilities of the businessman, because you have to start production yourself, in order to save a little at the initial stage of development.

For production you will need the following:

• machines: turning, sawing, grinding;
• jointer;
• table;
• utility tools.

If the products will be painted, it is necessary to allocate a separate room for work.

Lure buyers with original design and quality of work. The more unusual the product will be, the greater interest and delight it will cause.

Consumer goods manufacturing

Whatever happens in a person’s life, he will provide himself with everything necessary. The group of consumer goods includes the following:

• products
• footwear;
• clothes;
• household chemicals.

The types of production of each product are significantly different from each other.

Home-made products

Consumer goods were sold in past centuries. Only previously was the market limited to neighbors and relatives. Now such a home mini-production is developing on an industrial scale.

If the size of land ownership allows, you can grow vegetables, fruits, agricultural crops. At the moment, the state buys finished products of these types for the purpose of processing or resale.

Note. Quite often, the farmer works at a loss. This factor is due to the rather large initial financial investments and their incorrect distribution..

It is for this reason that it is necessary to preliminarily calculate all the costs of doing business and draw up a business plan with a project payback planning. This can be done independently, but it is better to involve a specialist.

The ideas of mini-production of consumer products do not end there. You can produce dairy products. It is worth considering that it is not necessary to keep cattle. It is enough to find a permanent supplier of quality raw materials.

It is possible to process milk and produce products from it only with the help of special equipment. Since such products are considered perishable and belong to the first risk group for infection with harmful bacteria. The process must be observed.

Tip. This type of activity needs to be registered, and a license must be obtained for the production of products.

Sewing shoes and clothes

Perhaps this is the most common type of home production. It requires little investment, since all work is carried out directly at home in a separate room, and the equipment is not too expensive. It’s better to start with product repairs, earning a reputation. The competition in this area is quite large. Over time, you can develop your production and switch to large volumes and the sale of finished products.

Mini bakery at home

Any hostess who can bake real culinary masterpieces wants to open her own production. You need to start small: bake rolls or pies. Then you can move on to more complex products: cakes, pastries and other sweets. It will not be superfluous to show your imagination. The more interesting the design and taste of the products, the more customers will become regular.

For baking products you will need a quality oven. Preferably one that runs on electricity. Furnaces of this type have several heating elements located at the top, bottom and sides of the oven chamber.

Small business - the production of any product at home. Over time, you can move to a new level, which provides for additional investment, and produce products on an industrial scale.

In the organization of own production, do not neglect the quality of products. It is also necessary to find suppliers of raw materials in advance and organize a sales market. Without proper product sales, further development and increasing business profitability are impossible.

In this material:

To organize a profitable business, it is not necessary to have a large starting capital, have entrepreneurial experience and a unique idea. Everything is much simpler. There are business ideas that are available for implementation in your own home. They do not require large investments and can quickly reach a good income.

Mini-production at home: advantages

Home based business is well developed in Europe and the USA. This tradition of entrepreneurship came to Russia only at the beginning of the 2000s. However, until now it remains little known and not as popular as abroad. This opens up great opportunities for entrepreneurs who are just exploring this market.

Ways and methods of doing home business are significantly different from traditional enterprises. This business model has its pros and cons.

Home Production Benefits:

• minimal investment;
• no need to have special knowledge - they are easy to master;
• lack of risk;
• lack of rent;
• flexible schedule;
• lack of superiors and senior management;
• simplicity of organization of production.

The main disadvantage of such a business is that the apartment turns into a production workshop, it is not always comfortable.

How to open home production, basic steps

registration

To register a business, the status of an individual entrepreneur is drawn up.

Registration includes:

1. The choice of registration method - at the place of residence or via the Internet.
2. Selection of OKVED codes. OKVED-code is an indicator that informs the authorities about what type of business activity is being registered.
3. Payment of state duty.
4. Registration of the application in the form of P21001.
5. Submission of application.

After registration of the IP, you must register with the tax. To do this, you must visit the tax office at the place of residence, select a tax system and write a statement.

Documents required for registration in tax:

• passport;
• TIN code;
• document confirming the status of IP.

Local market analysis

Home production is largely dependent on the local market, for which it is designed, so before opening a business, you must study the characteristics of the market.

The analysis will include:

• study of supply and demand;
• competition
• consumer activity of potential buyers;
• their financial capabilities.

If products are sold over the Internet, the entrepreneur is less dependent on the local market.

Drawing up a business plan

Without a business plan, not a single enterprise is opened. He helps the entrepreneur to learn all the subtleties associated with his idea.

The task of business planning is to help the entrepreneur understand how relevant and relevant his idea is, how difficult it is to implement it, and how to do it right. In addition, in the process of compiling such a project, all the details of the future enterprise are studied.

This allows you to comprehensively study the market, choose a marketing strategy, calculate financial costs, profitability of the idea and payback period.

Purchase of equipment and supplies

After choosing a niche, you need to buy equipment and raw materials for production, if they are not at home.

It is recommended to buy raw materials in bulk, so its cost will be lower, and earnings will be higher. It must be of good quality - in order to produce high-quality goods at the output. This is one of the guarantees that they will buy it.

Promotion

Before starting production, it is necessary to find markets for future products. There are many options for promotion, however, the effectiveness of each of them depends on a number of factors - the specifics of the product, the audience for which it is designed, the financial capabilities of the buyer.

Promotion Options:

1. Outdoor advertising - billboards, banners, on transport.
2. Advertising in local media, on TV. If TV advertising is expensive, then placement in regional print media costs a little, and its effectiveness with competent presentation leads many customers.
3. The Internet. This is one of the most convenient and inexpensive sources of accommodation. There are many sites for placement - contextual advertising, social networks, SMM, teaser advertising, placement on their own sites.
4. Own shops, outlets.
5. Through friends and relatives. At the initial stage of the development of home production, first customers are brought by friends and acquaintances. This is effective if manufactured goods or consumer goods.

Home Production Ideas for Men

Leather goods

Handmade leather goods are very popular. The manufacture of leather products is a business that does not require large investments. Craft is easy to learn, the cost of raw materials is low.

Popular leather goods made at home:

• bracelets;
• wallets
• trinkets;
• purse;
• cases for phones, other gadgets;
• belts;
• other products;
• custom production.

To open such a workshop you will need the following equipment:

• sewing machine;
• press for pressing images;
• knives for skin;
• threads.

It is better to buy raw materials in bulk from local suppliers. Before buying, it is important to check the quality of the skin. Buying online carries certain risks - the skin may be dry, undersized, too old.

Joiner's shop

In Russia, the demand for high-quality wood products is growing. Moreover, the range of goods is unlimited - window frames, doors, shelves, skirting boards, furniture, kitchen utensils, souvenirs and other products.

The advantages of such products are relatively low cost and high quality. They are made of high quality and environmentally friendly material.

Necessary equipment:

• lathe;
• grinding machine;
• saws;
• hacksaws;
• hammers;
• screwdriver;
• drill.

The list may be expanded depending on the specialization of production. It presents the necessary minimum required to open a workshop.

Raw materials - wood, varnishes, paints, iron - as needed.

Manufacture of handmade wooden caskets

Handmade caskets are a popular product for which there is always a steady demand.

The advantage of such a business is a low entry threshold and little competition. With high quality products, it will be expensive.

The downside of this business is the complexity of training. It is necessary to make not only caskets, but also cut out pictures and patterns on them. To do this correctly requires a lot of experience. Therefore, this idea is not suitable for everyone.

For the production of caskets, you will need the same equipment as for the carpentry workshop.

Modern stained-glass windows are a subject of a decor. They adorn the interior, windows, doors and chandeliers.

Outwardly, the stained-glass windows resemble a mosaic, which from ancient times adorned houses, public buildings and even temples. Today, the fashion for such products has returned, this has caused a growing demand for stained glass.

For production you will need:

• table for carving glass;
• grinder;
• laser milling machine;
• stained glass film;
• colored glass.

You may need additional equipment. It depends on the specifics of production and material processing techniques.

Business boards for children

Bizibord is a developing children's toy. Its task is to teach a child certain skills - to read, write, understand time, and receive communication and other skills.

Bizboards are different. Usually this is a flat board, equipped with various games, most often - combined.

Equipment required for production:

• equipment for wood processing - is selected depending on the features of the models of produced bodyboards;
• accessories for equipping bodyboards - are determined individually, depending on the model;
• varnishes, paints for wood.

Raw materials are environmentally friendly wood. Pine wood beads are in great demand.

Frameless furniture production

Frameless furniture - a product for which demand is increasing every year. Such furniture is also a great decoration for the interior. It is comfortable, beautiful and compact. It is bought both for home and for offices, aktikafe and other similar institutions.

Frameless furniture is popular among both children and adults.

Necessary equipment:

• sewing machine;
• press for packing accessories;
• table for sewing;
• other equipment - scissors, needles, patterns.

Materials:

• fabrics for covers;
• lightning;
• threads
• filler - fluff, feathers, foam, etc.

Business Ideas for Women in Home Production

Cakes to order

This is the most popular business idea among women. Demand for cakes is always stable. They are ordered for various holidays - for a birthday, for weddings, parties, corporate parties, etc.

Cakes made at home are different from those bought at the store. They are made according to a unique design, according to the customer’s order, only natural ingredients are used for cooking, and this is one of the main reasons for the popularity of homemade cakes.

Good cakes are expensive. Such a business does not require any investments - all the necessary equipment is in the kitchen. Cakes are baked on an advance payment - you don’t even have to buy raw materials for your money.

The main difficulty is development at the initial stage. The first six months you need to spend on operating time of the customer base. After that, you won’t have to search for orders - customers will order cakes themselves and recommend them to friends.

Handmade soap is a popular product. This is not only a hygiene product, but also a souvenir. Products in the form of toys, fruits, flowers are especially popular. In addition, ordinary multi-colored soap is in great demand - it looks beautiful and has a pleasant aroma.

Making soap is a simple process. It does not require special knowledge - every woman can master the craft.

To establish production does not need special equipment - just ordinary kitchen utensils.

Necessary raw materials:

• soap base - sold in special stores;
• dyes;
• flavorings;
• molds for soap;
• oils and other useful additives.

Sewing curtains and bedding

Curtains and bed linen are most often ordered in the studio. The reasons for this are the need to obtain a product that meets certain proportions - length and width. In addition, even curtains and underwear bought at the store are often altered. It’s easier to order from a dressmaker. Such a business is in demand, it can be organized both in a large and a small city.

Necessary equipment:

• sewing machine;
• lantern;
• place for cutting;
• other equipment - needles, scissors, patterns.

The downside of such an enterprise is the need for experience. To make quality products, you have to practice, hone your skills.

Making gingerbread at home is a popular idea for home production. Gingerbread cookies are a product for which demand is always high.

The peculiarity of this idea is creativity. If you bake ordinary gingerbread cookies, no one will buy them, and their cost will be low. Another thing is multi-colored pastries, which pleases not only the stomach, but also the eye. The emphasis is not only on taste characteristics, but also on the aesthetic appearance of the product. Every gingerbread is a work of art.

Essential Ingredients:

• flour;
• food colorings;
• sugar;
• flavors, sweeteners, marmalades, jams, honey;
• fruits, nuts, poppy.

Cheesemaking

Finding high quality natural cheese in Russia is not easy. The market is dominated by fake or low-quality goods. Good cheese is not enough. This is one of the main reasons why home-made cheese is a relevant business idea.

To establish the production of one kitchen will not be enough. Need a separate room, or a specially equipped room.

Necessary equipment:

• cheese maker;
• sterilizer;
• press;
• salting containers;
• racks for storing, ripening cheese.

Semi-finished products

Cooking takes a long time. Not everyone has free time to cook fresh dishes every day. This is the reason for the popularity of convenience foods.

Semi-finished product is a ready-made frozen product that needs only to be boiled or heated.

Semi-finished home production is a business that requires certain knowledge and experience, so it’s not suitable for everyone. Demand depends on the quality of products. It should be not only fresh and made from natural ingredients, but also tasty.

Options for the production of semi-finished products:

• vareniki;
• dumplings;
• whites;
• pies;
• pizza;
• stuffed pancakes;
• cutlets;
• sets of vegetables;
• cabbage rolls;
• stuffed pepper.

Necessary equipment:

• large freezer;
• meat grinder;
• mixer operator;
• dumplings.

Products can be sold in bulk or sold independently.

Home production is a great option for a novice entrepreneur. The profitability of such a business can be quite high, while the risks are minimal.

	Investments: Investments 3 350 000 - 5 500 000 ₽ New Chicken is a new project of BCA Restaurant Holding, behind which experience of opening more than 150 establishments in 8 countries of the world. The company is actively growing, developing new directions and knows what consumers need tomorrow. The company promotes a network of establishments according to the franchising model. Franchise Description The franchise package includes: manufacturing / trading / assembly equipment, furniture. The New Chicken franchise has ...
	Investments: Investments 2,200,000 - 5,000,000 ₽ The first and only personal security service in Russia available on your smartphone. Personal Security ARMADA We met with Armada.Vip co-owner Alexander Aliev to find out why it is important to be able to call a bodyguard within an hour, in what situations it may be needed and how the market for such services is developing in Russia. Why did you decide to start a business related to ...
	Investments: Investments 450 000 - 600 000 ₽ URAL-STROY has been operating in the construction services market since 2008. The company is engaged in private housing construction. Ural-Stroy adheres to the strategy of “Quality and Openness to the Client,” thanks to which it leads the cottage construction market. We build modern, comfortable turnkey houses. Our Goal: To become a developer - No. 1 in the Russian Federation in the segment of low-rise construction. Join us, and together we can develop ...
	Investments: Investments 550 000 - 1 000 000 ₽ DESCRIPTION OF THE COMPANY Network of laser hair removal studios Laser Love basis in 2018 in Novosibirsk. In the group of companies there is a distribution company responsible for the supply of equipment directly from the manufacturer. The company has all quality certificates for equipment - certificate of conformity and the European Union. Own line of equipment under the brand name DF-Laser guarantees the quality of the procedure from the first visit. Own marketing agency in ...
	Investments: Investments 3 800 000 - 5 000 000 ₽ G.Bar is the largest network of beauty bars in the world, which serves more than 60 thousand customers and provides more than 140 thousand services annually. The G.Bar network includes 6 own beauty bars (Kiev, Moscow) and 21 franchised ones in the world, including Russia, Ukraine, Poland, Kazakhstan, Kyrgyzstan, Slovakia, Cyprus, and the USA. The company was founded in 2015 and provides ...
	Investments: Investments 100 000 ₽ AWS - provides individual storage warehouses for private and corporate clients. Warehouse terminals are located in all areas of Moscow and the region. AWS is an investment proposal with franchise elements. AWS Franchise Description - Provides personalized warehouses for private clients and businesses. Concept: Minimal risk, profitable business while saving resources and time for the formation of service standards, ...
	Investments: Investments 1 490 000 - 3 490 000 ₽ BestVey Car Service Network is a network of body repair and locksmith stations that was founded in November 2014. Facts: Over 4 years, we opened 14 stations in 8 regions of Russia - in N. Novgorod, Kazan, Rostov-on-Don, Krasnodar, Ivanovo, Yaroslavl, Vladimir, Dzerzhinsk. In 2017, the cash flow of the group amounted to 211 million rubles. In 2018 ...
	Investments: Investments 370 000 - 1 000 000 ₽ Tundra Pyrolysis Boilers - An Alternative to Gas! You will be a producer and not an intermediary. Our pyrolysis boilers replace gas. This is the most profitable way to heat the room after the main gas. The 1st place for low cost is main gas (0.5 kopecks per kW); the 2nd place is pyrolysis boilers (0.8 kopecks per kW); the 3rd place is waste oil (1.83 kopecks per kW) 4 ...
	Investments: Investments 1 350 000 - 6 500 000 ₽ VodaTeplo® - sales, design, installation, warranty and after-sales service of heating, water supply, water treatment, sanitation, smoke removal, ventilation, air conditioning, electrical safety, video surveillance, “smart home” systems. And also plumbing, equipment for baths and saunas, fireplaces, bath accessories, equipment for fonts and pools, chemistry for pools and much more. WaterTeplo® - engineering systems. The most recognizable brand in our field !!! ...
	Investments: Investments 130 000 - 765 000 ₽ BestWay Consult (BestWay Consult) - provides a wide range of services aimed at financial recovery of individuals and legal entities. Our company includes several divisions, one of which is aimed at finding alternative options for improving housing conditions. We work with the largest federal projects in the Russian Federation and have a good opportunity to provide competent advice and assistance in processing ...
	Investments: Investments 300 000 ₽ The YAGE company was founded in 2017. Founder - Kalinkovich Dmitry Alexandrovich, who has 10 years of experience in creating and developing a franchising business, founder of Russia's first online driving school. The direction of activity is the automation of preparation for the exam / exam. The main goal of the company is to increase the overall level of exams and the result in points using the available online service. In development plans - with ...
	Investments: Investments 1 400 000 - 1 800 000 ₽ The Krown® brand was founded in 1986 in Canada. At the moment, more than 1000 integrated corrosion protection stations are successfully operating in the world. The unique T40 product, which was specially developed by the company's engineers, allows you to comprehensively protect vehicles that are harmful to the environment. The composition of the inhibitor is protected by a patent; production is organized only at the Krown® branded factory in Canada. More than 1,000,000 vehicles annually

Many novice businessmen think about home production. Such a desire is fully justified, especially in connection with the realities of the present time. We already wrote an article about. In this article, we will look at a lot of home production ideas and give comments on each idea.  We will also ask you in the comments under the article to offer your ideas for home production to complement the article.

Home Production Benefits

1. The need to spend the lion's share of income on rental of premises. This is home production. This issue is particularly problematic for start-ups, for whom rents can eat up most of the profits.
2. At first, such production may be unformed. Of course, this is only a temporary measure, which, nevertheless, will help to stand up and gain a foothold in the chosen industry.
3. The ability to adjust production volumes. All costs will rest on the cost of raw materials. This allows you to change the volume of production depending on the demand for the goods offered.
4. Minimum attachment size.
5. The ability to profit almost immediately.

All this allows you to significantly increase the chances of success and significantly reduce risks. Next, the most popular and profitable business ideas for production will be presented today. At the same time, they will be divided into blocks depending on the ability to work in the apartment or the need to carry out all the work in a private house.

Production at home in an apartment

In this block, the direction of home production is highlighted, which you can do right in your apartment. For greater convenience, we divided the ideas into thematic blocks.

Food

One of the most popular industries today is the household. Such a demand, first of all, is connected with the fact that the goods offered are everyday goods.

Fragrant pastries without leaving home

It is not necessary to have a special education to cook homemade goodies. Many women who cook well are successful in this business area. You will need quite a bit to work: a mixer, kitchen utensils. Any attentive hostess has all this in the kitchen. In addition, you can purchase special equipment with which you can knead the dough. A conventional oven for small volumes will be enough. Particular attention should be paid to recipes for baking and their external execution. Taste and aesthetic qualities must be at their best, so that customers are interested in the product. You can subsequently sell pastries on the street or carry out orders of restaurants and coffee houses.

Homemade preserves

Necessary costs: from 7-8 thousand rubles.

For such production, additional equipment may not be required. For normal operation you need: pots, jars with lids of different sizes (preferably small, as it will be easier to sell them), a seaming machine. As for raw materials, here you can go in two ways: either buy products in stores or in markets, or take everything you need from your own garden. It should be noted that the profitability of such a business in the winter is about 30%. But in the summer, selling jam is less profitable. Therefore, the blanks made in the summer can be held until the winter and sold at a better price.

Pickles

Necessary costs: from 10-12 thousand rubles.

As a basis, vegetables and mushrooms can be used. The former can be grown independently or purchased at a bargain price from farmers, the latter can be harvested in the forest or purchased in markets. To work, you will need your own stove, banks, lids, a seaming machine and the raw materials themselves. By the way, it is not necessary to be limited to cucumbers and mushrooms. The following dishes are quite popular today: sauerkraut and pickled cabbage, Korean carrots. It is worth thinking in advance about the sale of products. If the production is still quite small, you can offer to buy something to your friends, friends, neighbors.

Semi-finished products

Here, an option is considered when an entrepreneur is engaged in the manufacture of sausages, sausages, dumplings, meat dumplings purchased from farmers or at meat processing plants. If the businessman plans to raise animals himself, then he will need a country farm in which he will keep livestock. In this case, you will need to obtain permission to carry out sales in the Sanitary Epidemiological Station. All actions will also have to be coordinated with them.

Therefore, semi-finished products are the most acceptable option. At first, the assortment is better not to make large. About 30 items will be more than enough. It is worth taking care of the recipes. The tastier and more unusual the product will be, the greater the demand for it will be.

For work you will need ordinary kitchen utensils. Particular attention should be paid to the choice of knives, meat grinders. You will need a separate freezer to store finished products and simple meat.

Homemade phyto tea

Necessary costs: from 4-6 thousand rubles.

Today, people are increasingly monitoring their health and well-being. That is why the demand for “healthy” products is growing rapidly. Various phyto teas are no exception. At the same time, special tools and expenses are not required for work. Herbal preparations can be done independently in the summer, traveling to nature. Missing ingredients can be purchased at the pharmacy. In this case, the sale is best carried out in a dry form. You can think about a beautiful package of goods - buy special bags, print labels with the manufacturer’s phone number, name and composition of the collection. It is very important to comply with the proportions. A variety of recipes and the addition of spices, aromatic herbs will only increase demand. For work, you need measured scales, containers and raw materials.

Bulk goods packaging

Necessary costs: from 10-15 thousand rubles.

In this case, the sales volume will largely depend on how the packaging is framed. What can be packaged? Nuts, seeds, cereals. You can buy these goods at the base or some warehouse, pack them at home and offer your neighbors to buy a package of goodies at a bargain price. If you go to a more serious level, you will need to approach the creation of packaging in more detail and professionally. At first, you can do this manually. And gradually look for large customers who will be ready to buy products in bulk.

Needlework

In this block, production formats are selected that require special skills or talent from the entrepreneur.

Decorative polymer clay ornaments

Necessary costs: from 8-10 thousand rubles.

The main advantage over many stores will be the individuality, uniqueness of the proposed items. From a technical point of view, the process is quite simple. To work, you need special boards, knives of different sizes, material, small jewelry in the form of sequins, beads, buttons, chains and other things. In order for a product to be in demand, imagination, enthusiasm and skills must be invested in their products. Low cost helps to get a decent income for handmade products.

Handmade caskets

Necessary costs: from 3-4 thousand rubles.

There are many options. They can be made of wood, shells, sequins, beads and other jewelry. Moreover, all costs are reduced to purchase the necessary raw materials. Interesting ideas, schemes can always be found on the Internet. Particular attention should be paid to the upholstery of the inside of the box, handles. If the product is quite large, it makes sense to insert a mirror into it in size. It is worth taking care of creating special fasteners for storing rings, earrings, chains.

Handmade stained glass

Necessary costs: from 14–18 thousand rubles.

Similar decorations are used today to decorate the interior. Stained-glass windows are attached to walls, partitions, windows, doors. Moreover, competition in this industry is not so high. Of course, work will require skill. The presence of artistic abilities is also welcome. This work is rather laborious, but the payment will be impressive. Depending on the technology, you may need: oil paints, epoxy resin, glue, gelatin, dyes. The drawing is applied to stained glass. This is usually done not with brushes, but with thin needles - it is with the help of them that the contours of the image are displayed, and only then painted.

Handmade soap

Necessary costs: from 8-15 thousand rubles.

Today, many acquire similar products. Usually they are bought as a gift for some kind of holiday. It is in the pre-holiday periods that the demand for this product is very high. For the manufacture of soap you will need: essence (base), aromatic oils, jewelry, special forms, perfumes. It is worth thinking about recipes in advance. The first batch is better to make very small and use it yourself. You can earn even more by packing souvenirs beautifully. This will require special paper, ribbons, bows, ties. You can attach a contact phone number to presentations so that gift recipients can buy soap if they like it.

Frameless furniture manufacturing

Necessary costs: from 5-6 thousand rubles.

In this case, we are considering an interesting novelty - the production of bin bags. These are such pear-shaped soft chairs. Each time they take the form of a seated body. A similar product in stores costs about 6 thousand rubles. Moreover, the cost does not exceed thousands. For production, you will need a sewing machine, material, filler, thread. It is better to sell such products over the Internet. But acquaintances also need to offer goods at the earliest opportunity.

Hand made Montessori toy

Necessary costs: from 4-8 thousand rubles.

It is also called a business board. Such products are in great demand among young parents. In the manufacture of these toys, it is very important to think through all the details - from packaging to the quality of each part. When creating your own model, you can borrow one of the existing ideas. In this case, you will not need a certificate authorizing the use of an intellectual property object, since a business board is a subject of folk art. To create such toys do not need expensive equipment, and the materials are quite inexpensive. One such product can be sold for 5-15 thousand rubles. Montessori toys are best sold online. Delivery by Russian mail will not be so difficult. For work, you may need a variety of parts, a board on which they will be mounted and tools for fasteners.

Atelier at home

In fact, it is no different from ordinary, except for the volume of production. In this case, the seamstress will receive all the profits, which can significantly reduce the final cost of the product. For work, you will need special knowledge, skills, experience. The demand for the master can mean that he will initially have regular customers who can lead a few more people. For work you will need: a sewing machine, a place for cutting, an overlock, knives, scissors, supplies, buttons, lace, ruffles, locks, zippers and more. At the same time, materials can be purchased at the expense of the customer or work with already selected ones. High quality copyrighted items are very much appreciated today.

Handmade souvenirs

Necessary costs: from 6-50 thousand rubles.

Here you can work in one of two directions: engage hand made   or manufacture product business . In the second case, we mean promotional products applied to different surfaces (pens, T-shirts). The first format has a more seasonal focus. At the same time, consumables in the form of fabrics, beads, wood, and other things may be needed for work. But for working with promotional souvenirs, the initial costs will include the purchase of professional equipment. Everything will depend on the choice of direction. You can work with:

• ceramic surfaces (decal or silk screening);
• plastic;
• fabric (embroidery, thermal drawing);
• metal (laser engraving).

In this case, you may need various machines, presses, multifunction devices, printers. Such equipment is cheaper to buy in China.

Decoupage

Necessary costs: from 13-15 thousand rubles.

You can decorate with this technique many items, including furniture, napkins, tablecloths. Practically anyone can do this. The only important thing is to be diligent and show patience. Over time, skills improve the quality of work. That's when you can deal with decoupage for sale. For work you will need: glue, brushes, sponges, paints, primer, sandpaper, a special tool for decoupage, blanks from various materials (wood, cardboard, glass, etc.) and decor items. You can sell such products to friends, acquaintances. It’s best to do online deliveries. You can start even only from your city, and then expand production.

Magnets as a gift

Necessary costs: from 7–9 thousand rubles.

For many, this type of business seems frivolous due to the low cost of the products. In fact, you can make money on this very well. Important factors will be the originality of manufactured products and their aesthetic component. You can work in several directions at once:

• magnets with inscriptions;
• funny and funny items;
• educational magnets for children or even whole sets;
• calendars with magnets;
• holiday magnets for certain holidays.

At the same time, not so much is needed to organize such a production. Firstly, the magnets themselves will be needed, on which the main structure will be mounted. But the surface can be designed as you like - to make something from wood, plastic, draw on glass, do engraving, use polymer clay.

Home Production Ideas for Men

The ideas below are most common for men. That is why we have allocated them in a separate block. This does not mean that a woman cannot engage in these activities.

Glass Engraving

Necessary costs: from 20–35 thousand rubles.

If it comes to manual engraving using special devices, then such a production can be placed directly in the apartment. If you plan to use a special compressor and stencils, then it is better to deploy activities in a separate house or garage. The main advantage of this business is its exclusivity. Not many people are engaged in such work. You can do this as a hobby and get pretty good money for it. In addition to tools, material will also be needed, on which inscriptions and drawings will be applied.

Leather belts and accessories

Necessary costs: from 25 thousand rubles.

This product is popular among people of different ages. The demand for the idea lies in the fact that the accessory will be made manually, which adds exclusivity and originality to it. For work you will need leather, special hole punching machines, machines for flashing edges, jewelry. The profitability of this idea is at least 300%. As the material, pig skin, for example, can be used. You can buy it from local farmers for 200 rubles (price for one belt). At the same time, sales can be carried out via the Internet.

Production of keys

A mini-workshop can be arranged at home. The payback of this business attracts many entrepreneurs. At the same time, the production technique does not require any additional skills. To be able to work with different types of keys, you will have to purchase machines of different types. For the first time, 4–5 different ones will suffice. Each of them can cost about 14–70 thousand rubles. It is better not to buy Chinese-made machines, as they often break down a year after the start of use. You will need material for making duplicates. As an accompanying production, you can repair watches, locks, clothes. This idea is highly profitable. Markup for one duplicate can be about 500-1000%.

Seasonal production at home

This section includes those types of production that are considered seasonal. This means that the rest of the time you will have to do something else to get tangible profits.

Making brooms for a bath

Necessary costs: from 20-25 thousand rubles (the cost of the car is not included).

Brooms can be harvested from July to August. But you can sell them at any time of the year. In other months, manufacturing brooms is not recommended, as they will be of lower quality. Today, most often people acquire the following types of brooms:

• birch;
• oak;
• fake.

It is on them that we need to focus. You can add to them medicinal or aromatic herbs. In order to use forest resources without fear, it is necessary to conclude an appropriate agreement with forestry. Material can be collected directly in the forest, and drying can be done in a separate room. You can do this at home if you have a separate room for this. Do not exclude the option of leaving the city in your own home. The profitability of such production is about 100-150%. For work, you need an ax, a machine for transporting goods, materials for a bunch of brooms.

Making felt boots

This business idea is to process sheep wool and make felt boots from it. This type of production is seasonal, since mostly warm shoes are needed in December – February. The rest of the time, the business brings significantly less income. This type of shoe is especially relevant for residents of villages and cities of the northern region. In addition, you can increase the cost of the final product due to the exclusive design, decor. In summer, you can make mats for cars, slippers, bags, if you wish. For work you will need: clean wool, a carding machine, a felting machine, posting, rolling pin. The creation process is rather complicated. Before you do this, it is worth studying the relevant literature, watching training videos.

Making kvass at home

Necessary costs: from 50 thousand rubles.

If the production is small, you can limit yourself to an apartment. Larger events are best done in a separate private house. This business is especially profitable during the hot season. The following types of kvass are most popular in Russia today:

• bread;
• fruit;
• berry.

Small-scale production can do without special equipment, but large-scale production will require purchase: barrels or stationary racks, kegs, bottling equipment, containers, coolers. You can sell goods on the street. Then you will need another special rack and chair. It is possible to deliver products in bulk to coffee houses, summer bars.

Production in a private house

This block includes ideas, for the work of which they will definitely need their own private house to separate the working area. In addition, such classes require a larger area than previous ones. Mostly they all need a strong male hand, but there are exceptions.

Ideas for men

The ideas below are most common for men. If desired, women can set up production in these areas. However, it is unlikely that it will be possible to carry out production and marketing without male power.

Furniture manufacturing

Necessary costs: from 55-60 thousand rubles.

This type of production is beneficial due to a number of factors. Firstly, large investments are not needed for work. Secondly, the period for a product is very high. At the same time, resources are nearby, and there is no seasonality for products, which allows working with maximum efficiency all year round. Parts for production can be purchased in factories. At the same time, you will not be able to do without: a drill, a puncher, drills, a hammer, a saw, a screwdriver, a jigsaw and some other tools. To work, you will also need chipboard, countertops, facades and accessories to bring furniture into a salable condition. Have to think about the glazing of their products. Glasses can be ordered in special workshops or cut yourself with special equipment.

Own carpentry

Necessary costs: from 90 thousand rubles.

Such a workshop should have an area of \u200b\u200bat least 50 m 2. The height of the ceilings should be more than usual - about 4 meters. Be sure to have electricity. For the work of the carpentry workshop, it is necessary to collect documents that should be provided to the fire safety service. In addition, you will have to purchase a number of equipment, including: a jointer, a number of power tools, a face and circular saw, a chisel, a mallet, a hacksaw. It is very important to think over the assortment of goods that will be produced in the workshop. It can be small accessories in the form of door handles, and wooden figures, souvenirs, toys and much more. It is necessary to think about how it will be necessary to process the tree before its direct sale. From cheap materials you can make tables, stools, tables, adding exclusivity to them with the help of exotic ornaments. Business profitability averages 20–25%.

Production of veneered doors

Necessary costs: from 85–90 rubles.

This variety can be attributed to the carpentry workshop. And yet, door production is usually done separately. Such production is supplied to the stream. At the same time, the costs and necessary tools are the same as in the carpentry industry. The most important thing in this industry is to find your customer. Work with wholesalers is possible. In this case, it is worth considering cooperation with construction and finishing firms.

Mirror tile

Necessary costs: from 65–70 thousand rubles.

This type of production is considered highly profitable and very profitable. Manufactured products can be used for decoration. And it looks after such a restyling very interesting and spectacular. You can work in this industry according to the following scheme: purchase ready-made mirrors, cut them to suitable sizes and process them using special edge tools. For work you will need: a glass cutter, a table, an emery wheel, which allows you to process the tiles. Later it will be possible to buy a special machine, which will significantly increase the speed of tile production.

Home Production Brick

Necessary costs: from 200-300 thousand rubles.

To work, you need a fairly large room, so you need to carry out your activities in a private house. For work, the entrepreneur will need: a special machine (automatic semi-dry press) and molds for production. For manufacturing, the following consumables are necessary: \u200b\u200bsand, water, cement and dyes, clay. Some of these items can be purchased in bulk from suppliers. Such a business can pay off within six months. The maximum profit of a small mini-plant can reach about 200 thousand rubles. The following types of bricks can be produced:

• silicate;
• facing;
• color.

Production of artificial marble from concrete

Necessary costs: from 150 thousand rubles.

Such material is popular with companies that produce furniture. Such marble is quite specific; it is not so simple to establish its marketing. Profitability can vary greatly depending on local prices for raw materials and finished products. As consumables use a polyester resin and a special filler. You will need special machines that are not so cheap. The cost of one m 2 is about 200–250 rubles. The same volume of finished products can be sold for 14 thousand rubles on average. Consequently, the profitability is about 600-700%. The income is palpable even with small volumes of production.

Hand stamping

Necessary costs: 10-15 thousand rubles.

This kind of business is suitable for those who have virtually no start-up capital. For work, specialized equipment is not required, which significantly reduces initial costs. In addition, the technology of such stamping allows the manufacture of parts of different sizes, designs and geometry. An entrepreneur can easily expand the assortment presented in his production. The quantity of goods may also vary depending on the needs of the consumer. True profitability is not as high as, for example, in the manufacture of brick or artificial marble. First you need to study the video and master classes on working in this industry.

Metal Fabrication

Necessary costs: from 40–45 thousand rubles.

This type of production is relevant due to the fact that at present, individual housing construction is very actively developing. Under the metal structures we mean the manufacture of various gates, gates, visors, protective grilles and other attributes. Moreover, to sell such products is not difficult due to the constant demand for it. For work, it will be necessary to purchase equipment for cold forging of individual structural elements. This will increase the efficiency and profit of the enterprise. Having experience in this industry will be a significant plus. Distribution channels should be sought in construction companies, repair offices and teams.

Production of foam blocks

Necessary costs: from 60–80 thousand rubles.

This type of production is also very popular with novice entrepreneurs. This interest is associated with high demand for goods, and hence the easy sale of foam blocks. In addition, such a business is very cost-effective, and the investment is paid off in just a couple of months. Foam concrete is very popular due to the presence of the following properties:

• thermal insulation;
• sound insulation;
• high strength (not inferior to stone structures in this).

For the manufacture of forms of blocks, specialized equipment will not be needed - you can do everything yourself from plywood. At first, a concrete mixer can be rented. Then you can buy additional equipment that facilitates the work process.

Production of dry building mixes

In this case, the assortment can be chosen by the entrepreneur himself. It should be understood that each type is designed to carry out a specific type of work. The main consumers are repair and construction teams and companies. That is why it is better to think about cooperation with them in advance and offer their services for the delivery of goods. Talking about the demand for specific types of mixtures in Russia is very difficult. In order not to get into a mess, it is better to carefully study the characteristics of the market of dry building mixes in your region before starting work, and only then proceed to production.

Paint and varnish production

Necessary costs: from 30–35 thousand rubles.

This type of production has been profitable in the Russian market at all times. Finishing work is not without their use. You can include the following items in your assortment:

• putty;
• paint;
• glue;
• enamel and much more.

Income from such an enterprise can be substantial. The main thing is only to initially study the market, learn about your competitors, the level of demand for each type of product, and only then establish production. The undoubted advantage of this business is a quick payback. For work, you will need knowledge on how to make this or that type of product.

Production of indoor fountains

Necessary costs: from 20-25 thousand rubles.

This idea came to our country from China. Moreover, such production does not require large investments. Today, various elements of decor using water, including fountains and waterfalls, are in high demand. They have not only an aesthetic appearance, but also moisturize the air, make the atmosphere in the room more calm and harmonious. For the manufacture of fountains, you can use the following types of materials:

• a rock;
• glass;
• tree;
• clay;
• bamboo and more.

You can create a design yourself or browse the ideas available on the Internet. Similar products can be sold in souvenir shops, shops. Specialized equipment will not be required for work, but skillful hands will be very handy.

Wooden stairs

Necessary costs: from 60 thousand rubles.

This business requires minimal investment. Moreover, it can bring good profit. Stairs do not belong to the category of cheap products, but the demand for it is quite high and stable. They are bought not only to perform functions, but also aesthetics. That is why stairs made of natural material are especially popular. They are decorated with carving, patching or gilding. It is better to engage in their production on order, having discussed in detail all aspects of the future project. One flight of stairs costs about 100 rubles, which once again confirms the high profitability of the project. For work, you will need carpentry equipment, wood, small tools.

Ceramic Products

Necessary costs: from 50 thousand rubles.

This refers primarily to clay dishes. You can work on the basis of various:

• raw materials;
• coverings;
• destination goods.

They use ceramic products in everyday life, they also decorate apartments, houses. Handwork costs much more than those made in large factories. Much depends on the originality of the idea, the appearance of the dishes. The more aesthetic it looks, the greater the demand for it will be. For work, you will need a special design for working with clay (potter's wheel or machine), material. You will have to think about how to paint it, which ornament or pattern to add. From above, the dishes will need to be coated with a special varnish that is safe for humans.

DIY watering systems

Necessary costs: from 35-40 thousand rubles.

This idea is still quite innovative today. She came to Russia from China, but had already managed to conquer a certain part of the market. Drip irrigation systems can significantly save water consumption. You need to sell products on agricultural land, there it will be in great demand. These can be exclusive systems on order or quite ordinary options. To work, you need a lot of knowledge. It is very important to understand how the system works, how watering and the flow of water are carried out. Many tools are not required. Pipes must be sealed, insert gaskets.

Stoves for baths

Necessary costs: from 90–100 thousand rubles.

For work, you will need skills, a welding machine and material for the manufacture of goods. You just can’t do without a good welder. You can engage in custom manufacturing or create an assortment based on standard parameters. The main customers will be the owners of houses in the villages, at the dachas. Some of these stoves are installed in garages and simple cottages. It’s not possible to sell in bulk, it’s better to work precisely, because one furnace has a rather impressive cost.

Wood carving

Necessary costs: from 30–35 thousand rubles.

Such products attract customers due to their exclusivity and nobility. There are very few wood masters today. But the demand for wood products is constantly growing. You need to understand that to master the technique immediately does not work, because it is quite complicated. It will take a lot of time and diligence to do really high-quality and beautiful things. Important and the presence of knowledge, creativity. Any product is a reflection of the master’s soul, which is why they are so expensive. Crafts can be sold via the Internet or displayed in hand-made stores. Souvenirs made of wood are especially popular among the population. For work you will need high-quality material, a jigsaw and some other carpentry tools.

Non-freezing production

Necessary costs: from 40 thousand rubles.

This product is especially necessary for a motorist in the cold season. Make it easy. At the same time, you can earn good money. In the future, from a small production workshop, you can get a mini-factory. The most important thing is to find distribution channels. It can be auto parts stores, car enthusiasts inside the cooperative. Stable demand will provide a stable income. It will take a variety of technical equipment. At first, you can buy a used one, and only then increase the scale of production and establish a whole production line. According to the same principle, it is possible to establish production of antifreeze. The creation of both substances implies certain chemical reactions that require equipment and knowledge.

Production of monuments

Necessary costs: from 300 - 400 thousand rubles.

To begin with, it is worth aiming precisely at this ritual service. Subsequently, you can add others. For work you will need a workshop with an area of \u200b\u200b70-200 m 2. There should be placed special tables for engraving, a grinding machine, a place for draining, a polishing machine, pouring. The materials used are: cement, marble chips, rebar, etc. An undoubted advantage is the presence of a hoist or a hydraulic trolley. It will not do without cutting wheels, a punch, hammers, carts, engraving tools, tile cutters and much more. You need to find reliable suppliers and those who will print photos on metal-ceramic. Without technology, there’s nowhere, so you need to either hire knowledgeable people, or yourself to delve into all the intricacies of production.

Manufacture of products

Growing vegetables and fruits

Necessary costs: from 10-15 thousand rubles.

This type of production is best organized outside the city if you plan to work on a large scale. Here you can go in two ways: grow food in open beds or in greenhouses. In the first case, the costs will be minimal, and in the second - high productivity. Today, many people are trying to buy products from small manufacturers. Such interest in such products is due to the fact that they are not harmful to health, as they do not contain pesticides, GMOs and other harmful substances. To work more will require their own physical labor. It’s not possible to make a profit right away, because the products must grow before they can be sold.

Mushroom cultivation

Necessary costs: from 20-25 thousand rubles.

To organize such a production, it will be necessary to coordinate their work with the authorities. Rather stringent requirements are imposed on mushroom cultivation. As fertilizer, it will be necessary to use compost, which will have to be purchased from local farmers. Today the most popular mushrooms are:

• champignon;
• oyster mushrooms.

Moreover, champignons require very careful care. Growing them is not so easy. But income is more tangible than when growing vegetables and fruits. It will be possible to sell a certified product both at large supermarkets and to individuals. The latter can be set at a higher cost than the first.

Cheese making

Necessary costs: from 500 thousand rubles.

I must say that this industry is very promising in terms of generating income and further development. For legal work, you will need to obtain various licenses and certificates for the finished product. Preliminarily, a mini cheese production workshop should be equipped. It will not do without a veterinary certificate (it can be obtained from the seller of milk). The following types of cheese are especially popular:

• solid;
• semi-solid;
• soft
• brine.

At the same time, including one of the varieties in your project, you need to understand that each requires special equipment. Therefore, it is better to start with one species, and as soon as you make good profit, expand your production. Cheese has quite a few requirements that must be observed. You need to study them, view GOST.

For work, a fairly large area (about 350 m 2) will be required. There should be:

• manufacturing facility;
• fermentation shop;
• workshop for the ambassador;
• cold rooms.

You will need the following equipment: boilers, tanks, presses, starters, sterilizers, pumps, containers and much more. Such a business requires serious capital investments, regardless of the size of the enterprise.

How to sell manufactured goods

There are many ways and all of them are purely individual, depending on your knowledge, skills, financial capabilities, etc.

• You can sell your products on social networks and on your website on the Internet, making a website and running an advertisement.
• You can put up ads in the city and advertise in newspapers.
• You can sell through friends in the shops of the city.
• You can independently open a store or a tent in the market.
• You can sell in small wholesale, finding such orders through friends or on the Internet.

And many other options. Look at your situation individually and try to find your customers using different sources. And you will definitely find them.

Conclusion

That's all the ideas of small business in home production that came to our mind! The main thing is that you can find something for yourself. Only then can results be achieved in this business.

In conclusion, I want to ask you to supplement the selection of these ideas in the comments under the article and ask your questions.

• The implementation of modular paintings
• Particle coffins
• Step-by-step discovery plan
•   Tax system
• Permissions to open
  • • • Related business ideas:

We bring to your attention the ten best business ideas for mini-production, which can be organized in a small workshop or garage. Most of the products below can be produced by one or two people.

Modular paintings are a fashion trend in decorating home and office interiors. These products are in good demand and are purchased both as a gift and just for decorating walls (for example, for a family photo).

Technology for the production of modular paintings

Modular paintings are made from stretchers and fabric on which the image is applied. The production technology is not complicated and everyone can master it. Ready-made subframes are purchased from private wood masters (or purchased in stores), and the image on the fabric is printed using a conventional plotter.

The implementation of modular paintings

Modular paintings are sold through individual orders, specialty stores and hypermarkets, as well as in the format of live advertising (on busy streets). The retail price for modular paintings starts from 4 thousand rubles. Not a complicated business, which is organized in a small workshop. Learn more

A wooden pallet is a highly demanded product in logistics. Almost every industrial and commercial enterprise that sells products in large quantities needs pallets that greatly facilitate the loading and unloading of goods.

Pallet Production Technology

On a small “garage” scale, pallets are made manually using a pneumatic hammer. The main difficulty is to produce those very thin boards that form the frame of the product. For cutting such boards, special multi-saw frame machines (for example, RM-50) are used. The average price is 500 000 p. The approximate cost of one wooden pallet is 120 p., While retail - at least 200 p. "Navar" from 80 p. from one pallet. The production of 100 pallets per day will bring about 8,000 p. How to quickly make a pallet:

Particle coffins

We can say 100% option is the business idea of \u200b\u200bproducing coffins from chipboard (or other cheap materials). Funeral services  always in demand, regardless of the crisis. Dear coffins may not go, but budget (economy) in the conditions of crisis will be bought up just like that. Particleboard is used as an economy coffin frame, and sheathed with velvet or fabric. The cost of producing a unit of production is 2 to 3 thousand rubles. Such option costs 4-6 thousand rubles to the customer.

Garden figures for decorating household plots and summer cottages are in good demand in the spring and summer. The manufacturing technology of such products is extremely simple and boils down to pouring the previously prepared mixture into the finished form. After the figure dries up, it remains only to paint with a spray gun. The only difficulty in this case is to buy the very forms that are not cheap.

Garden figures are made of gypsum (a cheaper option), concrete or polystone. The most common methods of implementation: deliveries to large construction and hypermarkets, as well as sale near highways with a large flow of cars. The profitability of a business in the production of garden figures is estimated at 35%. Learn more

A good idea for a small business is the production of reinforced concrete rings. This product is extremely popular in the construction of wells, ventilation shafts and bridges. Due to the fact that the rings are quite heavy and their delivery is extremely expensive, there are not many large manufacturers of these products. This means that there is no huge competition and pressure from federal players. This is one of the best products for small production.

What attracts in this idea is a relatively inexpensive start and clear technology. The minimum set of equipment, including a concrete mixer, a vibration form and a vibrating screen, will cost about 150,000 p. All this "line" can fit in an open area of \u200b\u200b100 - 200 square meters. m. The main thing is to choose a flat horizontal surface. The main raw materials for the manufacture of reinforced concrete rings are: reinforcing cage, cement, crushed stone, sand and plasticizing additives. Sewer reinforced concrete ring with a diameter of 1 m at cost goes to 800 - 1300 p. The minimum selling price is 2000 p. Extra charge about 100%! Learn more

One of the most suitable ideas for home mini-production is the manufacture of silicone or polyurethane molds. Such forms are most often used for the production of decorative stone. The technology is quite simple, and from the equipment, only the “hands" of the master are mainly required. First, a sample is bought, according to which the future matrix (form) will be produced. It’s easier for everyone to copy samples from natural stone. The first thing you start with is to cut a stone sample into a thin layer and stick it on a flat surface. Then a formwork is created for pouring polyurethane. The joints are sealed. After the master model is ready, a release agent is applied to the surface of the model. Next, a polyurethane mixture is prepared. The most popular version is Ecarast RT 45A polyurethane. The resulting mixture is poured into the model and incubated for 4 to 5 hours. The form is ready!

The retail price of the silicone form starts at 1800 p. Extra charge not less than 100%. It is possible (and necessary) to sell such products via the Internet. So, according to the Wordstat (Yandex statistics), the phrase “buy a mold for the production of stone” is searched for about 9,000 times a month! Moreover, competition is practically absent. How a silicone mold is made is clearly shown in the following video:

The proven idea of \u200b\u200bhome mini-production is custom-made cakes. The idea is the best suited for lovers of home baking.

With the advent of social networks, advertising such a business has become much easier. Colorful cakes, some of which cost more than 6000 r. (Moscow, Peter), are laid out in photo albums that potential customers view. These cakes are most often ordered for birthdays, anniversaries, weddings and corporate events. It should be borne in mind that making cakes  custom made is seasonal. Most of the orders are in the spring, while in summer there is silence, as people leave for vacations. The profitability of this business is estimated at 70%.

It has been extremely fashionable recently to decorate children's rooms with shelving houses. This mini-furniture combines two useful functions at once. Firstly, this thing looks cool, and secondly - you can put toys, flowers, various trifles, etc. on it. At the same time, you can not only put the house-shelf on the floor, but also hang it on the wall. Thus, he will not take up space at all.

In general, the goods are in high demand, they are ordered on the Internet and bought in furniture stores. The production of houses - shelves is an excellent option for a small family business, which can be organized practically in "garage conditions".

Technology for the production of shelves

Materials for the house can be bought, so-called ready-made. That is, you take ready-made wardrobe shelves, horizontal shelves, boards 10x3 cm, glue for wood, nails, etc., cut the desired dimensions of the boards and assemble the structure. If you fork out for machines and produce cabinet shelves yourself, then the income will be even higher, since material costs are reduced. A house measuring 600 * 400 mm will cost at least 3,000 p. (prices can be found in online stores). While the cost of the material is not more than 1000 p. "Navar" count for yourself. The main condition for the success of such a business is the availability of good craftsmen. In principle, even a beginner can assemble a house-shelf. In the next video, an ordinary housewife collects a similar design:

Pillow for pregnant women is a specific product that is bought, as the name implies, only for a specific reason. But that does not make it low profitable. On the contrary, the margin on pillows for pregnant women is many times higher than on classic options. So, the price of an ordinary pillow made of artificial filler is on average 500 p., While for pregnant women - at least 1100 p. In this case, the material and filler are essentially the same.

Maternity pillows are distinguished from ordinary pillows by their unusual design, which can take the form of a horseshoe or bagel to support the head and abdomen. The main purpose of such pillows is to adapt as conveniently as possible to the human body and provide comfort during relaxation. For a small manufacturer, this product is interesting in that, unlike ordinary pillows, it is often bought on the Internet. Therefore, sales are much less problems. Can make a small site, advertise on social networks, on Avito, etc. Many options are also in the "offline". For example, take products to specialty stores for expectant mothers. The pillow workshop can be largely prefabricated. That is, you buy bedcloths made of TEC or microfiber fabric, cut into the required sizes, make covers from cotton, calico, satin. As a filler, you can use holofiber or artificial swan fluff.

The article will teach you how to sell goods through the Internet:

How to make money on Avito - tips and types of earnings.

The demanded goods for private houses and baths are metal stoves. A variety of fireplaces, potbelly stoves put even in garages. Not infrequently, such furnaces require an individual approach (each client needs his own sizes and lotions). Therefore, in addition to generally accepted standards, it is possible to produce stoves to order.

To build a small oven under the force of one person in a mini-workshop. Of materials, sheets of metal, pipes will be required, and of tools - a welding machine, a protective mask, a hammer, a set of electrodes and a grinder. Earnings from one sold part will largely depend on the high cost of the purchased material. Well, and trade margins respectively. So, the production of an elementary bath furnace can take 3,000 - 6,000 p., While it can be sold at a price of 10,000 p.

Step-by-step discovery plan

1. 1. Register a company.
2. Rent or buy a room for production.
3. Purchase materials and equipment necessary for production.
4. Hire employees.
5. To engage in the sale of manufactured products.

How much money can you earn on mini-businesses

It all depends on the type of mini-business:

1. If this is the production of modular paintings, then the implementation of one painting is from 4,000 rubles.
2. 2. The production cost of 1 pallet is 120 rubles, and it can be sold for 200 rubles.
3. The profitability of the production of coffins from particleboard is 100%.
4. The profitability of gypsum garden figures is 35%.
5. Reinforced concrete ring production will cost 800-1,300 rubles, it can be sold for 2,000 rubles.
6. The margin on the production of polyurethane forms is 100%.
7. The profitability of cakes on order is 70%.
8. The production of houses - shelves will cost 1,000 rubles, and they can be sold at a price of 3,000 rubles.
9. The cost of pillows for pregnant women is 2 times higher than usual.
10. 3,000-6,000 rubles will be spent on the production of a metal stove - a potbelly stove, and it can be sold for 10,000 rubles.

How much money is needed to start a business.

Again, it all depends on the type of mini-production. For some types of mini-business, you can not rent a room, but use your garage or premises in the private sector, and the production of cakes to order can be arranged at home. For others, it is necessary to rent a production workshop. In some types of business it is necessary to use wage labor, and accordingly the costs will increase. If you want to make good money and you have initial capital for investing, check out course catalogthat will help you understand the intricacies of investing and offer you turnkey solutions.

Which OKVED to indicate for the purpose of registration

OKVED 2 16.24- production of wooden containers. OKVED 20.75 manufacture of other fabricated metal products. OKVED 26.66 manufacture of other products of concrete, gypsum, cement. OKVED 2 13.92 manufacture of finished textile products, except clothing. OKVED 10.72.2 production of cakes and pastries for long-term storage.

What documents are needed to open

This business will require a package of documents related to production. It is necessary to register a business entity: it can be an individual entrepreneur, or limited liability company. The prepared documents must be submitted to state authorities or to the multifunctional centers of public services (MFC). It is also necessary to submit documents to the tax office, choose a tax form, the Pension Fund and the Social Insurance Fund.

  Tax system

For entrepreneurs, it is better to apply a simplified tax system (STS). There are two types of taxation: STS - “Revenues”, with a rate of 6% taxation and STS “Revenues minus expenses”, with a rate of 15% taxation. You can apply a single tax on sane income (UTII). Enterprises that have chosen this type of tax pay a single tax, but are exempt from property tax, profit and VAT.